Differences

This shows you the differences between two versions of the page.

--- litesom:devicetree:eth [2017/05/16 18:50]
filug
+++ litesom:devicetree:eth [2017/05/16 19:03]
filug [Network configuration]
@@ Line 106: / Line 106: @@
 This behavior can be changed via ''BR2_SYSTEM_DHCP'' configuration item.
+<button collapse="BR2_SYSTEM_DHCP">Show info about BR2_SYSTEM_DHCP</button>
 <collapse id="BR2_SYSTEM_DHCP" collapsed="true">
 <well>
+**Location**
+<code>
+-> System configuration
+  -> Network interface to configure through DHCP
+</code>
+**Help**
+<code>
+Enter here the name of the network interface (E.G. eth0) to
+automatically configure through DHCP at bootup.
+If left empty, no automatic DHCP requests will take place.
+For more complicated network setups use an overlay to overwrite
+/etc/network/interfaces or add a networkd configuration file.
+</code>
 </well>
 </collapse>
+If you want to modify ''/etc/network/interfaces'' file please read [[https://wiki.debian.org/NetworkConfiguration|Network Configuration]] howto from [[https://wiki.debian.org|Debian Wiki]].
+==== Network status ====
 Current network status you can verify by ''ifconfig eth0'' command
 <code>
+# ifconfig eth0
 eth0      Link encap:Ethernet  HWaddr 9E:EE:5F:94:B8:D3
           inet addr:10.42.0.133  Bcast:10.42.0.255  Mask:255.255.255.0
@@ Line 128: / Line 151: @@
 <code>
+# ip address show eth0
 : eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
     link/ether 9e:ee:5f:94:b8:d3 brd ff:ff:ff:ff:ff:ff