Differences

This shows you the differences between two versions of the page.

--- litesom:buildroot:quick_start [2017/02/04 19:42]
filug [Run firmware on liteSOM]
+++ litesom:buildroot:quick_start [2019/06/24 14:59] (current)
piotr.figlarek
@@ Line 1: / Line 1: @@
-====== Buildroot and liteSOM - quick start ======
+====== Quick start ======
-<alert type="info">
-[[:liteSOM:about|liteSOM]] is supported by the [[https://buildroot.org|Buildroot]] since [[https://git.buildroot.net/buildroot/plain/CHANGES?id=2016.11-rc1|2016.11]] release.
-</alert>
 ===== Download Buildroot sources =====
@@ Line 10: / Line 6: @@
   * download [[https://buildroot.org/download.html|stable release]] from [[https://buildroot.org/downloads/]],
-  * clone latest from FIXME ''git.buildroot.net/buildroot'' repository.
+  * clone latest from [[https://git.buildroot.net/buildroot]] repository.
-We recommends to use always the latest **stable** release. \\
+We recommends to use always **the latest stable** release.\\
 Below we will use stable release [[https://buildroot.org/downloads/buildroot-2016.11.2.tar.gz|2016.11.2]].
@@ Line 95: / Line 91: @@
 Insert programmed SD card to the [[litesom:liteboard]] card socket.
-Configure [[:litesom:boot switches]] as presented below.
+Configure [[:litesom:boot switches]] to boot liteSOM from SD card.
-<grid><col sm="7"><well>
-^  BMODE0  ^  BMODE1  ^  BT_CFG1[7]  ^  BT_CFG1[6]  ^  BT_CFG1[5]  ^  BT_CFG2[3]  ^
-|          |    ON    |              |      ON      |              |              |
-|   OFF    |          |     OFF      |              |     OFF      |     OFF      |
-^     1    ^     2    ^      3       ^      4       ^       5      ^       6      ^
-</well></col></grid>
 Connect your [[litesom:liteboard]] to your PC via USB ↔ micro USB cable.