Differences

This shows you the differences between two versions of the page.

--- litesom:buildroot:quick_start [2017/02/04 19:32]
filug [Run firmware on liteSOM]
+++ litesom:buildroot:quick_start [2019/06/24 14:48]
piotr.figlarek [Run firmware on liteSOM]
@@ Line 1: / Line 1: @@
-====== Buildroot and liteSOM - quick start ======
+====== Quick start ======
-<alert type="info">
-[[:liteSOM:about|liteSOM]] is supported by the [[https://buildroot.org|Buildroot]] since [[https://git.buildroot.net/buildroot/plain/CHANGES?id=2016.11-rc1|2016.11]] release.
-</alert>
 ===== Download Buildroot sources =====
@@ Line 10: / Line 6: @@
   * download [[https://buildroot.org/download.html|stable release]] from [[https://buildroot.org/downloads/]],
-  * clone latest from FIXME ''git.buildroot.net/buildroot'' repository.
+  * clone latest from [[https://git.buildroot.net/buildroot]] repository.
-We recommends to use always the latest **stable** release. \\
+We recommends to use always **the latest stable** release.\\
 Below we will use stable release [[https://buildroot.org/downloads/buildroot-2016.11.2.tar.gz|2016.11.2]].
@@ Line 52: / Line 48: @@
 <alert type="danger">Make certain that ''of=...'' points to your SD card. In case of mistake (when ''of=...'' points to your system disk) you can damage data on your system disk.</alert>
-<accordion>
+<button collapse="find-sd-card">Show how to find SD card</button>
-<panel title="Check how to find SD card device ...">
+<collapse id="find-sd-card" collapsed="true"><well>
 **Method 1**
@@ Line 87: / Line 83: @@
 <code>
 sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 bs=4M
 </code>
-</panel>
+</well>
-</accordion>
+</collapse>
 ===== Run firmware on liteSOM =====
@@ Line 96: / Line 92: @@
 Configure [[:litesom:boot switches]] as presented below.
-<grid><col sm="7"><well>
-^  BMODE0  ^  BMODE1  ^  BT_CFG1[7]  ^  BT_CFG1[6]  ^  BT_CFG1[5]  ^  BT_CFG2[3]  ^
+{{page>:litesom:boot switches&noheader&nofooter}}
-|          |    ON    |              |      ON      |              |              |
-|   OFF    |          |     OFF      |              |     OFF      |     OFF      |
-^     1    ^     2    ^      3       ^      4       ^       5      ^       6      ^
-</well></col></grid>
 Connect your [[litesom:liteboard]] to your PC via USB ↔ micro USB cable.
@@ Line 107: / Line 99: @@
 [[litesom:liteboard]] will be automatically powered-up and on debug console you should see starting Linux, as presented below.
+<button collapse="log">Show log</button>
+<collapse id="log" collapsed="true">
 <code>
 U-Boot SPL 2016.09.01 (Feb 04 2017 - 20:06:45)
@@ Line 359: / Line 353: @@
 buildroot login:
 </code>
+</collapse>
+With default configuration you can log as a ''root'' (no password needed) and start to use your [[litesom::liteboard]].