Differences

This shows you the differences between two versions of the page.

--- litesom:devicetree:eth [2017/05/16 13:55]
filug
+++ litesom:devicetree:eth [2017/05/16 18:47]
filug [Network configuration]
@@ Line 101: / Line 101: @@
 </columns>
+===== Network configuration =====
+Default [[litesom:buildroot|Buildroot]] configuration for [[litesom:liteboard|the liteboard]] is using <tooltip title="Dynamic Host Configuration Protocol">DHCP</tooltip> to configure internet connection.
+This behavior can be changed via ''BR2_SYSTEM_DHCP'' configuration item.
+Current network status you can verify by ''ifconfig eth0'' command
+<code>
+eth0      Link encap:Ethernet  HWaddr 9E:EE:5F:94:B8:D3
+          inet addr:10.42.0.133  Bcast:10.42.0.255  Mask:255.255.255.0
+          inet6 addr: fe80::9cee:5fff:fe94:b8d3/64 Scope:Link
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:38 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:5906 (5.7 KiB)  TX bytes:1654 (1.6 KiB)
+</code>
+or ''ip address show eth0''
+<code>
+: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
+    link/ether 9e:ee:5f:94:b8:d3 brd ff:ff:ff:ff:ff:ff
+    inet 10.42.0.133/24 brd 10.42.0.255 scope global eth0
+       valid_lft forever preferred_lft forever
+    inet6 fe80::9cee:5fff:fe94:b8d3/64 scope link
+       valid_lft forever preferred_lft forever
+</code>