Differences

This shows you the differences between two versions of the page.

--- devices:loragw [2019/01/03 06:59]
m.mironiski Added production files
+++ devices:loragw [2019/06/22 20:26]
piotr.figlarek
@@ Line 21: / Line 21: @@
 {{:devices:loragw_1.3_sch.pdf|Download}}
-{{pdfjs>:devices:loragw_1.3_sch.pdf|LoRa Gateway 1.3}}
+{{pdfjs 1000px>:devices:loragw_1.3_sch.pdf|LoRa Gateway 1.3}}
 ===== Production files =====
@@ Line 188: / Line 188: @@
 where ''<PIN>'' is your pin e.g. ''1234''.
 Then type command:
+    sync
+<alert type="info">To apply changes of gateway settings it's necessary to reset the device by turning off and on power supply or typing the following command:
+    reboot
+</alert>
+=== Registration ===
+<alert type="info">The gateway is configured to work by default with [[https://www.thethingsnetwork.org/|The Things Network]] but it can works with any LoRaWAN network e.g. [[https://www.loriot.io/|LORIOT]] as well.</alert>
+**The Things Network**
+Sign up on [[https://www.thethingsnetwork.org/]] and open [[https://console.thethingsnetwork.org/|console]].
+{{ :devices:loragw_ttn_console_1.png?600 |}}
+Choose ''Gateways'' and then ''Register gateway''. Check option //I'm using the legacy packet forwarder// and type the gateway EUI which you own or generated in previous step. Choose frequency plan and router according to your region.
+{{ :devices:loragw_ttn_console_2.png?600 |}}
+Register your gateway and restart it. After few minutes you its status should change to ''connected''.
+{{ :devices:loragw_ttn_console_3.png?600 |}}
+**Other LoRaWAN network**
+To work with other LoRaWAN network it's necessary to adjust the gateway configuration.
+Log into the gateway and edit the configuration file:
+    vi /ttn/local_conf.json
+Find section ''servers'' and add new instance or edit existing one. The gateway can forward packets to maximum 4 servers parallelly.
+    ...
+    /* node servers for poly packet server (max 4) */
+    "servers":
+    [ { "server_address": "127.0.0.1",
+        "serv_port_up": 1680,
+        "serv_port_down": 1681,
+        "serv_enabled": false },
+      { "server_address": "router.eu.thethings.network",
+        "serv_port_up": 1700,
+        "serv_port_down": 1700,
+        "serv_enabled": true } ],
+    ...
+for example:
+    ...
+    /* node servers for poly packet server (max 4) */
+    "servers":
+    [ { "server_address": "eu1.loriot.io",
+        "serv_port_up": 1780,
+        "serv_port_down": 1780,
+        "serv_enabled": true },
+      { "server_address": "router.eu.thethings.network",
+        "serv_port_up": 1700,
+        "serv_port_down": 1700,
+        "serv_enabled": true } ],
+    ...
+Save file and type the following command:
     sync