Differences

This shows you the differences between two versions of the page.

--- litesom:customization [2017/02/05 17:37]
filug
+++ litesom:customization [2017/02/05 18:04]
filug [Extra files]
@@ Line 81: / Line 81: @@
 </code>
-<accordion>
+====== More details about this customization ======
-<panel title="More details about this customization">
 ===== Buildroot configuration =====
@@ Line 92: / Line 91: @@
 </code>
-Complete configuration for [[https://buildroot.org|Buildroot]] is available in ''configs/grinn_liteboard_lcd_res_defconfig'' file.
+Complete configuration for [[https://buildroot.org|Buildroot]] is available in [[https://github.com/grinn-pub/examples/blob/master/configs/grinn_liteboard_lcd_res_defconfig|grinn_liteboard_lcd_res_defconfig]] file.
 ===== Device tree =====
+<code>
-<pre>
 .
 ├── board
@@ Line 104: / Line 102: @@
 │           ├── imx6ul-liteboard-lcd-res.dts
 │           ├── post-build.sh
-</pre>
+</code>
-Buildroot configuration for ''liteboard'' doesn't contain any configuration for LCD nor touchscreen therefore this demo will use customized device tree file ([https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/imx6ul-liteboard-lcd-res.dts imx6ul-liteboard-lcd-res.dts]).
+[[https://buildroot.org|Buildroot]] configuration for ''liteboard'' doesn't contain any configuration for //LCD panel// nor //touchscreen// therefore this demo is using customized device tree file ([[https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/imx6ul-liteboard-lcd-res.dts|imx6ul-liteboard-lcd-res.dts]]).
-During kernel compilation this file will be compiled and output will be stored as <code>imx6ul-liteboard-lcd-res.dtb</code>. You can find this file inside <code>output/images</code> directory.
+During kernel compilation this file will be compiled and output will be stored as ''imx6ul-liteboard-lcd-res.dtb''. You can find this file inside ''output/images'' directory.
-Unfortunately on the target during boot procedure U-Boot will try to load <code>imx6ul-liteboard.dtb</code> file which will be not available on uSD card. Therefore every build Buildroot via <code>post-build.sh</code> script will adjust name of the ''Device Tree Blob'' file to the expected by the U-Boot.
+Unfortunately on the target during boot procedure [[http://www.denx.de/wiki/U-Boot|U-Boot]] will try to load ''imx6ul-liteboard.dtb'' file which will be not available on //SD card//. Therefore every build [[https://buildroot.org|Buildroot]] via [[https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/post-build.sh|post-build.sh]] script will adjust name of the ''Device Tree Blob'' file to the expected by the [[http://www.denx.de/wiki/U-Boot|U-Boot]].
-== Kernel configuration ==
+===== Kernel configuration =====
-<pre>
+<code>
 .
 ├── board
@@ Line 120: / Line 118: @@
 │       └── liteboard-lcd-res
 │           ├── linux.defconfig
-</pre>
+</code>
-Customized Linux configuration is stored in <code>linux.defconfig</code> file. It will be used by the Buildroot to initialize proper kernel configuration.
+Customized [[https://kernel.org|Linux]] configuration is stored in [[https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/linux.defconfig|linux.defconfig]] file. It will be used by the [[https://buildroot.org|Buildroot]] to initialize proper kernel configuration.
-== Extra files ==
+===== Extra files =====
-<pre>
+<code>
 .
 ├── board
@@ Line 138: / Line 136: @@
 │                       └── rules.d
 │                           └── 60-touchscreen.rules
-</pre>
+</code>
 To simplify/unify board setup two config files should be available on running liteboard:
-* [https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/profile.d/tslib.sh /etc/profile.d/tslib.h] - to configure device for [https://github.com/kergoth/tslib tslib] library,
+  * [[https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/profile.d/tslib.sh|/etc/profile.d/tslib.sh]] - to configure device for [[https://github.com/kergoth/tslib|tslib]] library,
-* [https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/udev/rules.d/60-touchscreen.rules /etc/rules.d/60-touchscreen.rules] - to guarantee permanent name for the touchscreen device.
+  * [[https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/udev/rules.d/60-touchscreen.rules|/etc/rules.d/60-touchscreen.rules]] - to guarantee permanent name for the touchscreen device.
-Each time when <code>make all</code> command will be called Buildroot will automatically copy <code>rootfs</code> directory content to the target <code>root</code> directory used in the next step to generate image for the liteboard.More details about this customization
-== Buildroot configuration ==
-<pre>
-.
-├── configs
-│   └── grinn_liteboard_lcd_res_defconfig
-</pre>
-Complete configuration for buildroot is available in <code>configs/grinn_liteboard_lcd_res_defconfig</code> file.
-Each time when <code>make grinn_liteboard_lcd_res_defconfig</code> is called Buildroot is configured as defined within this file.
-== Device tree ==
-<pre>
-.
-├── board
-│   └── grinn
-│       └── liteboard-lcd-res
-│           ├── imx6ul-liteboard-lcd-res.dts
-│           ├── post-build.sh
-</pre>
-Buildroot configuration for ''liteboard'' doesn't contain any configuration for LCD nor touchscreen therefore this demo will use customized device tree file ([https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/imx6ul-liteboard-lcd-res.dts imx6ul-liteboard-lcd-res.dts]).
-During kernel compilation this file will be compiled and output will be stored as <code>imx6ul-liteboard-lcd-res.dtb</code>. You can find this file inside <code>output/images</code> directory.
-Unfortunately on the target during boot procedure U-Boot will try to load <code>imx6ul-liteboard.dtb</code> file which will be not available on uSD card. Therefore every build Buildroot via <code>post-build.sh</code> script will adjust name of the ''Device Tree Blob'' file to the expected by the U-Boot.
-== Kernel configuration ==
-<pre>
-.
-├── board
-│   └── grinn
-│       └── liteboard-lcd-res
-│           ├── linux.defconfig
-</pre>
-Customized Linux configuration is stored in <code>linux.defconfig</code> file. It will be used by the Buildroot to initialize proper kernel configuration.
-== Extra files ==
-<pre>
-.
-├── board
-│   └── grinn
-│       └── liteboard-lcd-res
-│           └── rootfs
-│               └── etc
-│                   ├── profile.d
-│                   │   └── tslib.sh
-│                   └── udev
-│                       └── rules.d
-│                           └── 60-touchscreen.rules
-</pre>
-To simplify/unify board setup two config files should be available on running liteboard:
-* [https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/profile.d/tslib.sh /etc/profile.d/tslib.h] - to configure device for [https://github.com/kergoth/tslib tslib] library,
-* [https://github.com/grinn-pub/examples/blob/master/board/grinn/liteboard-lcd-res/rootfs/etc/udev/rules.d/60-touchscreen.rules /etc/rules.d/60-touchscreen.rules] - to guarantee permanent name for the touchscreen device.
-Each time when <code>make all</code> command will be called Buildroot will automatically copy <code>rootfs</code> directory content to the target <code>root</code> directory used in the next step to generate image for the liteboard.
-</panel>
+Each time when ''make all'' command will be called [[https://buildroot.org|Buildroot]] will automatically copy [[https://github.com/grinn-pub/examples/tree/master/board/grinn/liteboard-lcd-res/rootfs|rootfs]] directory to the ''output/target'' directory used in the next step to generate image for the [[liteSOM:liteboard]].
-</accordion>